Yokogawa BT200 field communicator
The BT200 BRAIN Terminal is used to set, change, display and print out parameters such as tag numbers, output mode, and range for equipment that use BRAIN communications. This handheld terminal also monitors I/O values and self-check results, sets constant-current output, and allows zero adjustments. To perform these functions, it must be connected to the equipment’s 4 to 20mA DC signal transmission lines or to a dedicated connector on the ESC (Signal Conditioner Communication Card) when the system is started up or maintained
BT200 Used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters. As a portable terminal, the Model BT200 BRAIN TERMINAL is used in combination with equipment using brain communication for setting, changing, displaying and printing out parameters such as tag number, output mode, and range, through simultaneous communication. It also monitors I/O values and self check results, sets constantcurrent output , and allows zero adjustments. The Model BT200 BRAIN TERMINAL is used by connecting it between 4 to 20 mA DC signal transmission lines of the equipment or to a dedicated connector on the ESC (Signal Conditioner Communication Card) when the system is started up or maintained.
Online non-interruptive (transparent) communication
The modulated communication signal does not interrupt the 4 to 20 mA DC signals on the communications loop. This loop functions automatically while the terminal is online.
Diagnostics/ security with error messages
In addition to the terminal’s self-check functions, there is a code entry function that helps maintain the integrity of important setup data.
Built-in thermal printer
|This option enables on-the-spot printouts of tag numbers, calibrations, configurations, and more. Customers will appreciate the ability to print out quality assurance and ISO 9000 documentation.|
EMC Conformity Standards
EN61326-1 Class A, Table2 (For use in industrial
LCD dot matrix, 21 characters
Five AA 1.5 V dry alkali batteries (LR6/AM3 (N))
For Intrinsic safety type; Five
designated batteries (see OPTIONS)
BT200-N00 . . . 228*110*51 mm
BT200-P00 . . . 321*110*61 mm
BT200-N00 . . . 510 g (1.12 lb)
BT200-P00 . . . 700 g (1.54 lb