Portable Ultrasonic Flow Meter
Product Introduction
Portable ultrasonic flow meter achieve non-touch flow measurement.As long as install the sensor outside the tube flow meter will work to measure flow rate,convenient and accurate. Ultrasonic flow meter can measure heat and temperature conveniently with temperature sensor. Ultrasonic flow meter is widely used in water supply,heat supply,water conservancy,metallurgy, chemical,machinery,power etc industries,used for production monitoring,flow comparison,temporary detection,hydraulic balance debugging,heating network balance debugging etc.
Features
1. High accuracy: Linearity: 0.5%, repeatability:0.2%, accuracy up to ±1%.
2.Non-contacting measuring: The ultrasonic flow meter will be adsorbed on the
outside of pipe, and then finish the measuring. Non-intrusive, clamp-on
transducer, no pressure drop, no pipe disturbance.
3.Wide measuring range: Several types transducer for selection, pipe size from
DN15mm to DN6000mm
4.Chinese & English menu: Chinese & English display, easy to operate.
5.Large capacity battery: Built-in rechargeable Ni-MH rechargeable battery,provide over 20 hours of continuous operation.
6.Built-in printer: Built-in mini thermal printer with instant and timing print function,also you can print more than 20 kinds of measuring results if you set in advance.
7.Built-in data logger: Uplink over 20 measuring data to computer or internet.
Items | Performance & Parameter | |
Main unit | Principle | Transit time ultrasonic flowmeter |
Accuracy | ± 1% | |
Display | 2×20 character LCD with backlight, support the language of Chinese, English and Italian | |
Signal Output | 1 way 4-20mA output, electric resistance 0~1K, accuracy 0.1% | |
1 way OCT pulse output(Pulse width 6~1000ms, the default value is 200ms) | ||
1 way relay output | ||
Signal Input | 3 way 4-20mA input, accuracy 0.1%, acquire signals such as temperature, press and liquid level. | |
Achieve to heat measurement by connecting the temperature transducer PT100. | ||
Data Interface | Insulate RS485 serial interface, upgrade the flowmeter software by computer, support MODBUS | |
Data Record | Thermal printer, external SD card(2G of capacity) | |
Pipe Installation Condition | Pipe Material | Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed. |
Pipe Diameter | 15~6000mm | |
Straight Pipe | Transducer installation should be satisfied: upstream 10D, downstream 5D, 30D from the pump. | |
Measuring Medium | Type of Liquid | Single liquid can transmit sound wave, such as water, sewage, oil, chemicals, plant effluent, beverage, ultra-pure liquids, etc. |
Temperature | -30~160℃ | |
Turbidity | Less than 10000ppm and little bubble | |
Flowrate | 0 ~ ±7m/s | |
Working Environment | Temperature | main unit: -20~60℃; Transducer: -30~160℃ |
Humidity | main unit: 85%RH; Transducer protection level: IP67 | |
Power Supply | 8 built-in Ni-MH batteries 1.2V(for over 20 hours of operation). Could operate 8 hours by connecting 4-20mA signal output. 90V - 260V AC adapter | |
Power Consumption | 1.5W |
Name | Technical parameter | |
HOST | principle | Ultrasonic time difference principle,4 byte IEEE754 floating-point operation |
accuracy | Flow rate:better than ±1% | |
Signal output | 1 way 4-20mA output,impedance0-1k,accuracy0.1% (optional) | |
1 way OCT pulse output(pulse width 6-1000ms, default 200ms) | ||
1 way relay output | ||
Signal input | 3 way 4-20mA current input,accuracy 0.1%, collect temperature,pressure,level etc signal | |
Connect 3 wire PT100 RTD for heat measurement | ||
Data interface | isolate Rs485 serial interface,support MODBUS etc protocol | |
Data logging | Thermal printer,external SD card,capacity up to 2G | |
Pipeline condition | material | Steel,stainless steel,cast iron,copper,PVC,aluminum etc compact pipeline,lining allowable |
inner diameter | 15-6000mm | |
Straight pipeline | Sensor mount point(better):upstream 10D, downstream 5D,distance from pump outlet 30D (D:pipe diameter) | |
Measuring medium | medium | Water,sea water,industrial sewage,acid alkali solution etc homogeneous liquid |
temperature | -30~160℃ | |
turbidity | 10000ppm and little bubble content | |
velocity | 0~±10m/s | |
Working environment | temperature | Host:-20~60℃;flow sensor:-30~160℃ |
humidity | Host:85%RH;flow sensor protection class IP67 | |
Power supply | 8 built-in 1.2V capacity 2000mAH rechargeable battery,per charge work 20 hours continuously,optional 4-20mA output 8 hours. AC90-260V power adapter achieve uninterrupted measurement | |
Power dissipation | 1.5W |