UHZ level meter magnetic level gauge type
Product Introduction
This series meters are widely used in the liquid level measurement and control of electricity, petroleum, chemical industry, metallurgy, environment protection, ship building, civil construction, food and other industries.
It can be used to measure level of various vessels in the shape of tower, kettle, groove and ball as well as boiler furnace. It can be used in complex conditions, such as highsealing, leak prevention, high pressure, high temperature and corrosion. In the measurement process, no measurement blind area. It strikingly displays the level and has a wide measurement range. Compared with traditional glass plate level gauge, it is safer, more reliable, more advanced and more practical. The most obvious characteristic is the complete isolation of liquid medium and indicator so it can be used safely, reliably and durably in any case.
Technical parameter
|
Measure Range: |
150~8000mm (center distance) or on request. |
|
Nominal Pressure: |
PN6.4MPa Class 400LB ANSI |
|
Working Pressure: |
≤4.8Mpa 300LB |
|
Working Temperature |
450°C 723.15K |
|
Medium Density |
500~2000kg/m³ |
|
Chamber(bypass tube) |
Φ63.5×3mm |
|
Process Connection |
Factorty Standard: DN25 PN 6.4MPa HG20592-97;400LB 1" ANSI B16.5;
Optional std: 1/2"~ 4" ANSI B16.5; DN10-DN100 GB/T 9112-2000; JB/T 79.1-94 SH3406-1996 DIN 2635;DN10-DN100; DIN 2527;DN10-DN100 10A~100A JIS 30K FF RF; 1/2"~4" JPI 400LB RF |
|
Chamber/Flange/ Wetted Material |
304, 316, 316L, 316Ti, 321, 1.4301, 1.4435, 1.4401, 1.4571, 1.4783, 0Cr18Ni9, 1Cr18Ni9Ti, 00Cr17Ni14Mo2, 0Cr17Ni12Mo2, 0Cr18Ni2Mo2Ti |
|
Magnetic Float |
Its size depends on liquid density Material: Titanium, 316SS or 316L SS |
|
Optional Items |
1 Tri-magnet level switch 2 Quad-magnet level switch 3 Heating Jacket 4 Depth Vacuum heating jacket 5 Coil type heating jacket 6 Drain/Vent valves 7 Transmitter(4~20mA, two/ three wire,HART) Magnetostrictive level transmitter |
Model type
|
UHZ |
With blind flange, no drain valve |
||||||||||
|
L |
Bottom drain valve |
||||||||||
|
G |
Tri-magnet driven level switch |
||||||||||
|
GH |
High temperature four-magnet driven level switch |
||||||||||
|
Control points(quantity of level switches) |
|||||||||||
|
R |
Ltransmitter two wire 4~20mA output |
||||||||||
|
R1 |
LB transmitter HART two-wire 4~20mA output |
||||||||||
|
R2 |
AT200 Magnetostrictive transmitter two-wire 4~20mA output HART |
||||||||||
|
R3 |
AT201 Magnetostrictive transmitter three-wire 4~20mA output HART |
||||||||||
|
R4 |
AT202 High temperature magnetostrictive transmitter output HART |
||||||||||
|
R5 |
AT203 High temperature transmitter three-wire output HART |
||||||||||
|
D |
ExdIIBT1~T6 Explosion proof |
||||||||||
|
E |
ExiaIICT1~T6 Intrinsically safe |
||||||||||
|
EF |
Intrinsically safe with barrier |
W |
Wide rollers board |
||||||||
|
Removable heating jacket |
J2 |
Sleeve type heating jacket |
|||||||||
|
J3 |
Coil type heat tracing device |
J4 |
Depth vacuum jacket |
||||||||
|
J5 |
Depth vacuum insulation& compound heating jacket |
||||||||||
|
Installation height(N/A for side-side mounted level gauge |
|||||||||||
|
(M)Measuring range,mm |
|||||||||||
|
Medium density,kg/m3 |
|||||||||||
|
Nominal pressure |
|||||||||||
