wika stainless steel pressure gauge
Product Introduction
-Highly accurate reading of low pressures
-Ranges from -600-0, 0-10 to 600mbar
-Zero adjustment through window
-For non-corrosive and corrosive gases
-According to EN837-3
Application
1.Suitable for measuring gaseous media both corrosive and non-corrosive
2.Used to measure natural gas pressure as well air flow indications and leak detection
3.Vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators and respirators
Dial: | 2.5”,3”, 4”, 6” |
Range: | 2.5”: 0 ... 25 mbar to 0 ... 600 mbar 3”,4”: 0 ... 10 mbar to 0 ... 600 mbar 6”: 0 ... 6 mbar to 0 ... 600 mbar |
Accuracy Class: | 2.5”:2.5% 3”,4”,6”: 1.6% |
Case: | black steel, 304SS or SS316L |
Lens: | Polycarbonate or tempered glass, laminated safety glass |
Measurement elements: | beryllium bronze single or double diaphragm; SS316L double diaphragm plasma welding and lasing welding. |
Socket: | Brass or SS304,SS316L |
Connection: | NPT standard |
Movement: | Brass or SS316 |
Dial | Aluminum |
Pointer: | Aluminum |
Zero adjustment | ± 10 % of full scale value(without zero adjustment option) Adjustment screw on the front side after removing of the window |
Working Pressure: | 75% of full scale value |
Over-Pressure Limit: | 30% of full scale value |
Ambient Temperature | -40°F to 150°F (-40°C to 65°C) |
Enclosure Rating | IP54 |
| Dial | 1.5″,2″,2.5″,4″,6",8",10"(40mm,50mm,63mm,100mm, 150mm, 200mm, 250mm) |
| Case Material | Stainless Steel 304, DIN Bayonet |
| Accuracy class | 1.5″(40mm),2(50mm):±2.5% of full scale |
| Scale ranges | -1—1000bar |
| Process connection: | 1⁄8″,1⁄4″, 1/2″NPT OR BSP standard with restricted orifice |
| Burdon tube: | 316LSS,drawn seamless |
| Wetted parts/socket: | Stainless steel 304 or 316 |
| Movement | 316SS |
| Point | Aluminum,micrometer adjustable |
| Welding | TIG, Laser welding |
| Window(lens) | Tempered glass,safety glass |
| Fill | Glycerin |
| IP Class | IP65 |
