24 Series UE Pressure Switch
The cost-effective 24 Series Delta-Pro pressure, vacuum, and differential pressure switches offer a unique blend of compact size,excellent performance, and environmental protection. Available with brass or polysulfone pressure connections the Delta-Pro is ideal for applications involving hot or cool air, water, gas or oil. The precision snap-acting switch and sensitive diaphragms combine to provide a narrow deadband and repeatability of approximately ±1% of full scale range. A convenient, externally accessible adjustment screw is multi-turn to provide easy set point adjustability. The force-balanced design gives the Delta-Proexcellent vibration resistance.
Storage temperature：-20° to 180°F (-29° to 82°C)
ambient temperature：30° to 160°F (-1° to 71°C). Set point typically shifts less than ±0.6% of range for a 50°F (28°C) ambient temperature change; consult factory for special ratings
max media temperature：200°F (93°C) at 100 psi working pressure
ShockSet point repeats after 15G, 10 millisecond duration
VibrationSet point repeats after 2.5G, 5-500 Hz
EncloSure claSSificationComplies with enclosure type 4 requirements with optional water tight conduit
connector. Reinforced polyester body, stainless steel cover with gasket.
Set point repeatabilityTypically1% of full scale range.
Switch output One SPDT precision snap-acting micro-switch with mechanical contact life of 10
million cycles. Actual life depends on electrical load and cycle frequency
Electrical ratingRated to 5 A resistive and 5 A inductive (75% PF) at 125 VAC and 250 VAC, 1/4 HP; 5 A resistive and 3 A inductive at 30 VDC and 0.5 A resistive and 0.25 inductive at 125 VDC. Gold flash over silver contacts for minimum loads of 5 mA at 6 VDC, 2
mA at 12 VDC and 1 mA at 24 VDC
weight 6.5 oz.
Electrical connection7/8" hole for optional 1/2" NPT conduit connector. Terminal block with screw terminals.
Max wire size 16 AWG
Pressure connectionModels 013-014, 019-022: 1/4" NPT (female) brass; models 011-012, 015-018: 1/4" NPS
(female) FDA compliant* Udel polysulfone, non-tapered to minimize connection stress with 1/4" NPT (male) fittings - max torque is 2-ft.lbs.
Mounting & inStallationSurface mount with two screws through clearance holes, or mount by pressure