The 54 Series offers the OEM a combination of reliable performance and low cost. Available in pressure and temperature versions, with single or dual SPDT outputs and enclosed or open frame (skeleton) construction, the 54 Series family provides design versatility.The 54 has been field-proven in a wide variety of OEM applications, including medical, laboratory, fire protection and heating equipment.
◆NEMA 1 or Open Frame Construction
◆SPDT or Dual Switch Outputs
◆Reference Dial or Hex Adjustment
◆Adjustable Ranges from 30" HgVac to 6000 PSI
◆UL, CSA, and CE Approvals
◆Many Models Available from Stock
◆Optional external manual reset
◆Optional 1/2” NPT (male) by 1/8” NPT (female) polysulfone pressure connection
Pressure Models: Models 126-164, S164B, 610-614:-40 to 160°F (-40 to 71°C);Models 22-28; 16008, 16009: 0 to 160°F (-18 to 71°C)
Temperature Models: -40 to 160°F (-40 to 71°C). Set point typically shifts less than 1% of range for a 50°F (28°C) ambient temperature change.
SHOCK: Set point repeats after 15 G, 10 millisecond duration
VIBRATION: Set point repeats after 2.5 G, 5-500 CPS
ENCLOSURE CLASSIFICATION: Types C54, C54A, B54, F54, E54, J54, J54A, H54: complies with NEMA 1 requirements. Types C54S, B54S, F54S, E54S, J54S, J54AS, H54S: not applicable
SET POINT REPEATABILITY: Pressure ModelsModels 22-28, 16008-16009, 126-164, S164B: ± 1% of full scale range; Models 610-614: ± 1.5% of full scale range
SWITCH OUTPUT: One or two SPDT snap action switch(es); dual switch may be separated up to 100% of range; switches may be wired “normally open” or “normally closed”
ELECTRICAL RATING: 15A 125/250/480 VAC resistive except models 16008-16009 - 20A 480/VAC. Electrical switches have limited DC capabilities at 24-30 VDC, 2A resistive and 1A inductive. 125 VDC, 0.5A resistive, 0.03A inductive. Consult UE for additional information.
ENCLOSURE MATERIAL: Lexan® black finish for Types J54, J54A, H54, B54, C54, C54A, E54, F54 only
WEIGHT: Approximately 12 oz.
ELECTRICAL CONNECTION: Types J54 & H54, C54, C54A, B54, E54, F54: 7/8” diameter hole; Type J54A: 1-1/16” diameter hole
PRESSURE CONNECTION: Models 22-28, 16008, 16009: 1/4” NPT (male); 126-164, 610-614: 1/4” NPT (female);S164B: 1/2” NPT (female)
TEMPERATURE ASSEMBLY: Bulb and Capillary: 6 feet copper or 304 stainless steel capillary Immersion Stem: Brass
TEMPERATURE FILL: Non-toxic oil
TEMPERATURE DEADBAND: Typically 1% of range under laboratory conditions (70°F circulating bath at rate of 1/2°F per minute change)