Emerson Rosemount 2051 Pressure Transmitter
Rosemount 2051 series pressure transmitter is specially designed for a wide range of application requirements. It provides reference for accuracy of 0.075%, 100:1 range than, 2 years of stability. Using strong commonality of common graphic platform design, the pressure, Connection is the best process flow and level measurement applications. 2051 series pressure transmitter can provide comprehensive differential pressure, Gage pressure and absolute pressure measuring scheme, thus satisfies the customer the pressure, Liquid level and flow measurement requirements. Work more efficiently with the Rosemount 2051 In-Line Pressure Transmitter, an industry standard device that delivers reliable process data.
Up to ±0.05% of span
Up to ±0.125% of Upper Range Limit (URL) for 5 years
Up to 5-year limited warranty
Up To 100:1
4-20 mA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS®, 1-5 V Low Power HART®
Up to 10000 psig (689,47 bar) Gage, Up to 10000 psia (689,47bar) Absolute
Process Wetted Material
316L SST, Alloy C-276
SIL 2/3 certified to IEC 61508 by an independent 3rd party, NSF, NACE®, hazardous location, see full specs for complete list of certifications
In-line gage and absolute pressure measurements support up to 10000 psi (689,47 bar) for pressure and level solutions
Delivered fully assembled to manifolds or diaphragm seals for straightforward installation
Intuitive Local Operator Interface streamlines commissioning for simple and cost-effective installation
SIL 2/3 certified to IEC 61508 (via 3rd party) and prior-use certificate of FMEDA data for safety installations
The Coplanar transmitter houses a capacitance sensor with patented Saturn™ sensing technology enhancing performance to deliver industry-leading accuracy and overpressure protection. The Coplanar configuration is easily integrated with a variety of manifolds, primary elements and remote seals. Configurations deliver performance and functionality for differential pressure, true gage or absolute pressure readings.
The Rosemount In-line Transmitter uses field-proven, piezoresistive sensor technology converting resistance into an electrical signal. In-line Transmitters connect directly to the process with a direct threaded connection, manifold or seal system solutions. This configuration is designed for accurate and reliable true gage or absolute pressure measurements.
Multivariable Transmitters are engineered with multiple sensing elements in the same transmitter housing. An innovative design, this single device is capable of providing differential pressure, static pressure and process temperature measurements. Multivariable Transmitters are commonly used for mass flow and energy measurement applications.
Paine Sensors are available in a diaphragm or tube configurations. The diaphragm design consists of a wheatstone bridge with foil gages on the diaphragm with two legs in tension and two in compression and is typically used for pressures less than 5000 psi (345 bar). The tube-type sensor is designed with sets of strain wire wrapped around a pressurized tube and tied together to form a wheatstone bridge. They are generally used with pressures greater than 5000 psi (345 bar).
SUBSEA SENCORR PRESSURE SENSOR
Engineered for long-life operations in harsh subsea production environments, the Roxar subsea SenCorr sensor is a silicon piezoresistive sensor that measures pressure and temperature. Both are measured simultaneously at a common point via a standard bridge coupling, providing complete temperature compensation of the pressure reading. This sensor can also be packaged with sand erosion and corrosion sensors in the same transmitter for more complete process information.