Yokogawa Gauge pressure transmitte
Product Description
EJA530E Gauge Pressure Transmitter,Yokogawa EJA530E Pressure Transmitter
The high performance absolute and gauge pressuretransmitter EJA510E and EJA530E feature single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam pressure. EJA510E and EJA530E
output a 4 to 20 mA DC signal corresponding to the measured pressure. It also features quick response,
remote setup and monitoring via BRAIN or HART communications and selfdiagnostics. FOUNDATION
Fieldbus, PROFIBUS PA and 1 to 5 V DC with HART (Low Power) protocol types are also available.
All EJA-E series models in their standard configuration, with the exception of the Fieldbus,PROFIBUS
and Low Power types, are certified as complying with SIL 2 for safety requirement.
Specifications
EJA510A / EJA530A Direct Mount Type Absolute Pressure and Gauge Pressure Transmitter (Measurement values below are in absolute for EJA510A) | |||||
A Capsule | B Capsule | C Capsule | D Capsule | ||
Range | 0 to 200 kPa (0 to 29 psi) | 0 to 2 MPa (0 to 290 psi) | 0 to 10 MPa (0 to 1450 psi) | 0 to 50 MPa (0 to 7200 psi) | |
Span | 10 to 200 kPa (1.45 to 29 psi) | 0.1 to 2 MPa (14.5 to 290 psi) | 0.5 to 10 MPa (72.5 to 1450 psi) | 5 to 50 MPa (720 to 7200 psi) | |
Accuracy | ±0.2% | ±0.2% | ±0.2% | ±0.2% | |
Degrees of protection | IP67, NEMA 4X, and JIS C0920 immersion proof | ||||
Certificates | FM, CENELEC ATEX, CSA, IECEx | ||||
Output | 4 to 20 mA DC or FOUNDATIO fieldbus or PROFIBUS PA 2-wire system with digital communication | ||||
Supply voltage | BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity model and 9 to 17.5 V DC for FISCO model) | ||||
Ambient temperature | -40 to 85 deg C (-40 to 185 deg F) (general use type) -30 to 80 deg C (-22 to 176 deg F) (with integral indicator) | ||||
Process temperature | -40 to 120 deg C (-40 to 248 deg F) (general use type) | ||||
Maximum overpressure | 4 MPa (580 psi) | 4 MPa (580 psi) | 20 MPa (2900 psi) | 60 MPa (8500 psi) | |
Mounting | Direct Mounting/2-inch pipe mounting | ||||
Wetted parts material | Capsule | Hastelloy C-276 | |||
Process connection | SUS316L, Hastelloy C-276 | ||||
Housing | Cast aluminum alloy or SUS316 equivalent stainless steel (optional) |
Specifications of Gauge Pressure Transmitter EJA438E
Model | Application | Type | Capsule | Measurement Span | Maximum Working Pressure | ||
kPa | inH2O | MPa | psi | ||||
| Differential | Traditional- | F | 0.5 to 5 | 2 to 20 | 16 | 2300 |
| Flow | Integral | F | 1 to 5 | 4 to 20 | 16 | 2300 |
| Differential | Extended | M | 2.5 to 100 | 10 to 400 | Based on Flange Rating | |
| Draft | Traditional- | E | 0.1 to 1 | 0.4 to 4 | 50 kPa | 7.25 |
| Differential | Traditional- | M | 1 to 100 | 4 to 400 | 32 | 4500 |
| Liquid | Flush | M | 1 to 100 | 4 to 400 | Based on Flange Rating | |
| Absolute | Traditional- | L | 0.67 to 10 | 0.2 to 2.95 inHg | 10 kPa | 2.95 inHg |
| Gauge | Traditional- | H | 5 to 500 | 20 to 2000 | 500 kPa | 2000 inH2O |
| Diaphragm Sealed Gauge Pressure Transmitter EJA438E | Flush | A | 0.06 to 3.5 MPa | 8.6 to 500 psi | Based on Flange Rating | |
Extended | A | 0.06 to 3.5 MPa | 8.6 to 500 psi | ||||
| High | Traditional- | C | 5 to 32 MPa | 720 to 4500 psi | 32 | 4500 |
| Absolute | Direct- | A | 10 to 200 | 1.45 to 29 psi | 200 kPa | 29 |