Stainless Steel Pulse Output Water Meter
Product Introduction
This pulse water meter is used to measure the total volume of water passing through the pipeline,
It can not be used to measure corrosive liquids. This dry dial pulse water meter is magnetically coupled
drive, and has a certain antimagnetic interference function, compact structure, small volume, the generoso appearance. Counting parts are the pointer combined with the wordwheel, which can be clear readings and
also convenient. The pulse table position can be set according to customer requirements, this water meter
can apply to the RF card water meter and Internet reading system.
Working Condition
A. For cold water, working temperature: 0.1ºC~40ºC working pressure: ≤1.6Mpa
B. For hot water , working temperature: 40ºC~90ºC working pressure: ≤1.6Mpa
Error indicating
a) Low zone: ±5% from minimum flow rate to transitional flow rate
b) High zone: ±2% from transitional flow rate to overload flow rate; hot water will be±3%
Mainly Technical data
water meter technical data
Reed switch technical data